No Picture

Traditional vs. Tankless Water Heater


So you’re looking at water heaters and by now have realized that your two main options are tank storage heaters and tankless water heaters. You want to know which one is best for your situation, and what the differences are.

The main difference between the two is the tank. While it seems like a simple difference, it’s actually a big distinction that affects the efficiency and the way the unit is used.

Traditional tank storage heaters hold water and keep it heated until it is directed to a shower or tap. These can run on gas or electricity, and typically have a capacity of 25-50 gallons. Gas water heaters normally use less energy than electric ones, but the upfront cost can be higher.

Tankless water heaters San Francisco CA have no holding tank, and subsequently, heat the water as it passes through the unit. These heaters are more expensive than traditional tank water heaters, but they can also be more efficient and have a longer useful life, as well. Though they don’t have a tank full of hot water waiting for you, they are quick to heat the water as it passes through the unit.

They aren’t all perfect, however. If you depend on only one tankless heater for your home, you may have a difficult time having enough hot water if two bathrooms are using hot water simultaneously, or if the washer is filling up with hot water and someone is trying to run a bath.

One solution (and smart way to save money with tankless water heaters) is to install a smaller one closer to each place in your home that uses hot water. Doing this can cut the amount of energy used to heat your water by up to half, and you also won’t have to worry about not having enough hot water to go around.…

No Picture

The Future Of Solar Energy In The US – What To Expect?

Utility customers need to be aware of how batteries can significantly lower their electric bills.

Residents should be able understand how energy is used in their homes throughout the day to get an estimate of their potential savings.

This is however much easier said than done. It is not easy for customers in most US cities to find this basic information. In some areas, it is almost impossible.

Some utility providers may not even have this data. It can be very time-consuming to find that data, and it may also cost a lot of money.

Complex Pricing Structures

This is an increasing problem as utility providers are constantly changing their rates structures. Many utilities now charge time-of-use rates which fluctuate with electricity rates throughout the day. This allows them to bill customers at the highest electricity rate they use during a given day.

Most ratepayers don’t know how to react to these complex pricing structures and reduce their electric bills. Customers are forced to pay exorbitant utility bills, without knowing how to reduce them.

Even more concerning is the fact that this problem also affects nonprofit organizations. The lack of energy data can have a devastating effect on companies that provide basic welfare services and affordable housing to communities in need.

While these groups pay the same electricity rates that larger companies, they don’t have access to the same amounts of their electric data. These organizations don’t have the resources or the expertise to access the data, let alone interpret it.

Although this is obviously not fair, it is still an important topic. This injustice must be rectified by smarter policies.

Utility Customers Are Unhappy with Their Electricity Bills

Utility consumers should have access to their energy usage data, at least once per hour, to understand the importance of battery storage for their home or business.

Due to lack of data access, many customers in the US face major obstacles. Here’s what customers don’t know.

  • If their home/office/building uses electricity
  • The amount of electricity that the building uses at different times in a day or during a billing cycle.

Utility consumers don’t have this information and are left wondering how they can reduce their electricity bills.

Energy Advocates and Analysts Highlight the Problem

This data barrier was mentioned in Florida’s arguments against residential demand charges in 2018. Surprisingly, despite heavy opposition, it was approved.

Acadia Center, a northeastern advocacy organization, stated that utility customers in Florida don’t have any way to know when the highest demand was, due to the absence of an advanced metering system. It was also difficult to figure out how to manage high electricity prices.

This data problem is not unique to Florida. In 2017, the Federal Energy Regulatory Commission released a report that estimated that only 40% utility meters had the ability to record detailed electricity usage data by 2015.

These numbers, according to FERC, showed wide disparities in sophisticated metering deployment – from less than 10% in the Greater New England area to more than 80% in Texas. However Texas is doing well economically.

Although advanced metering has been used by around two-thirds (if not all) of consumers since 2015, access to the data is very limited.

This post was written by a professional at Red Solar. was started with the mindset of renewable energy being the future. We want everyone to travel through this transition. We can all agree that solar is the best way to reduce your carbon footprint, but it’s not the only way. During a Red Solar energy evaluation, all energy commons in your home will be analyzed for results. Our expert technicians will guide you through the process for better understanding and reassurance. Contact us for more information today!

No Picture

What Determines the Price of Alcohol?


Finding alcohol at a reasonable price can often be difficult, depending on where one resides. Many people are uninformed on where to shop if they are new to drinking or don’t realize the wide variety of options they have. Here are the main factors that sway the price and selection of alcohol.


If one is purchasing alcohol in a big city such as New York or Chicago, that person will likely pay an escalated price and have a wide range of choices. The reason is due to the higher cost of living in these areas and a larger population density. People in larger cities often enjoy many different kinds of alcohol because of the diversity of the inhabitants.

On the other hand, in smaller towns, the demographic will be a lot less diverse, and the population will enjoy similar types of alcohol. Therefore, the selection will generally be weaker, but due to the low cost of living, the price will be much lower.


Buying beer from a grocery store, such as Walmart, will be inherently cheaper than going to a local bar or pub to purchase the same beer on tap or even from a can. People who go to bars may pay a steeper price for their alcohol because of the social atmosphere that comes with it. However, bars rarely sell alcohol in quantities as large as chain grocery stores do.

In terms of stores that sell bulk alcohol exclusively, it is common to pay a higher price at a smaller liquor store that has an alcohol license Dallas TX. Liquor stores offer a much wider variety of drinks compared to chain grocery stores because they often sell drinks that are unique to that part of town or are difficult to find.

As long as people are informed about how alcohol prices are determined, they won’t be surprised when they get their bills from bars or liquor stores.…

No Picture

Frequently Asked Questions About Solar Panels

Solar panels are an increasingly popular option for homeowners who are seeking to reduce their energy costs. Solar panels are not only environmentally friendly but can even save homeowners the entire cost of their electricity bills, plus some extra if they sell excess energy back into the grid. However, solar panels do have a high enough up-front cost that it’s important to get all of your questions answered before deciding whether or not to install them.

The following are some frequently asked questions about solar panels.

Do Solar Panels Pay for Themselves?

Eventually, solar panels can pay for themselves. How long it takes depends on the amount of sunlight they can absorb and how many solar panels you have. If your solar panels can power your entire house so that you don’t need to pay for electricity, then the amount you save on those energy bills will add up over time until it equals the amount you spent on the solar panels. Solar panels can pay for themselves even faster if they produce excess energy that you can sell to electric companies.

How Many Solar Panels Do You Need?

How many solar panels you need depends on the energy needs of your home as well as how much sunlight you get per year. Someone living in Florida or California, states known for their sunshine, will get better use out of solar panels than someone living in Oregon or Washington, which are known for their rain. You’ll have to calculate how much energy each solar panel can generate based on the amount of sunlight it can absorb and then determine how many would be needed to meet your home’s energy needs.

You can have fewer solar panels if you’re just looking to reduce your energy bills rather than eliminate them completely. Additionally, if you’re wanting to sell excess energy to electric companies, then you may want to consider more solar panels than fewer.

Can You Install a Solar Panel System Yourself?


Some home improvement projects can be done DIY. Installing solar panels is not one of those projects. Because solar panels are very sophisticated, there’s too great a risk of causing damage or injury if a homeowner attempts to personally install them. Solar panels should only be installed by professionals.

Do Solar Panels Increase a Home’s Value?

Typically, solar panels do increase the value of a home. They’re not portable, so once they’re installed, they stay with the house. If a home with solar panels is sold, then the new homeowner would benefit from the energy savings of the solar panels without having to pay for the costs of installing them. As the seller, you’d recover the costs of the installation because the home’s overall value would increase.

Are Solar Panels Noisy?

The solar panels themselves aren’t typically noisy. The solar power converter, which connects the solar panels to your home’s electrical system, may make some noise. However, it’s typically not louder than a refrigerator would be. Additionally, the solar power converter would be located somewhere near other utilities like the water heater or the HVAC unit. It wouldn’t be in a living space where it could disturb residents of the home.

This article was written by a solar expert at Solar Tech Elec. Solar Tech Elec is one of the premier solar companies in charleston sc with expanded services in North Charleston, and Florida. They work with homeowners to install photovoltaic systems and provide them with a way to save money on their energy bills, protect themselves against rising electricity prices and be part of the solution for clean renewable energy.

No Picture

The Advantages and Disadvantages of Using Alternative Energy

Alternative energy is energy that is used to support the use of conventional energy. It is referred to as alternative energy because it is a backup energy for existing conventional energy.

Alternative Energy

One form of alternative energy is solar energy which can be used to generate electricity with the help of solar panel technology .

This discussion will explain the advantages and disadvantages of using alternative energy. Here is the explanation.

Alternative Energy Advantage

1. Alternative Energy as Renewable Energy

The advantage of the first use of alternative energy is that it never runs out because it is included in renewable energy. Meanwhile, fossil energy, coal, oil, and other conventional energy will run out in about 100 years. The latest technology has indeed succeeded in showing fossil energy sources that have never been found.

However, this energy will also remain depleted when used continuously and by many people. This is where the important role of renewable alternative energy because it will never run out. As long as there is still a shining sun on earth, humans can use it using solar panels.

The changing temperature of the sun will also trigger the wind, so it can be used for wind energy. Likewise with the availability of abundant water on earth. Explaining the advantages and disadvantages of using alternative energy cannot be separated from its presence which is very important to support energy use.

2. Free Energy Source

Another advantage of using alternative energy is that it does not cost money to buy it because it can be obtained for free. An example is sunlight which is used as an energy source for solar panels, you don’t need to buy it because it is available in abundance. The costs required are the initial costs for installation and preparation.

The rest of this alternative energy can run by itself without the need to pay for re-purchase. This is of course different from the price of coal or oil which tends to always rise and requires a fee to make repeat purchases. Therefore, there are some people who choose to take full advantage of alternative energy.

3. Environmentally Friendly

The discussion that explains the advantages and disadvantages of using alternative energy certainly cannot be separated from the advantages of being environmentally friendly. The use of alternative energy does not produce harmful gases or other processes that can damage the environment. Utilization of wind energy does not produce any pollution that affects the environment.

Likewise with the use of solar energy and water energy, although the results are not as clean as wind energy. They all do not produce carbon emissions which are feared to be the main cause of environmental damage on earth. In contrast to fuel oil which produces a lot of harmful gases and can cause air pollution.

Alternative Energy Disadvantage

1 . Fairly High Initial Installation Cost

After knowing the three advantages of using alternative energy, now is the time to know the disadvantages of using alternative energy.

The first drawback of using alternative energy is the high initial installation cost. For example, when using water alternative energy, a dam must be made first.

This of course requires a lot of money and many things need to be prepared. But don’t worry, there is one alternative energy with an affordable investment cost.

You can use alternative energy solar power to supply electricity in your home. With the help of solar panel technology, you can get electricity at an affordable investment cost with SUN Energy.

SUN Energy is the largest solar panel developer in Indonesia, with a DP0%, now you can have solar panels from SUN Energy.

2 . There are still few users

Quoted based on the press release of the Minister of Energy and Mineral Resources “311.Pers/04/SJI/2020” that the current capacity (generating) of energy sources is 70.96 Gigawatt (GW). Of the total energy capacity, 35.36% of the energy comes from coal; 19.36% came from natural gas, 34.38% from oil and EBT (New and Renewable Energy) by 10.96%.

In fact, Indonesia is noted to have NRE resource potential of more than 400 Gigawatt (GW). This is a very large number compared to currently available energy sources. Of this total energy, only 2.5% of the alternative energy is utilized. And of course, over time the use of alternative energy will increase.


Alternative energy does have some advantages and disadvantages that are worth considering. One of the wise steps that can be taken is to continue to use it even though it is only 50 percent. You can use solar panel technology from SUN Energy to help reduce the use of electrical energy from conventional energy.…

No Picture

Types of Mine Pump Dewatering

Dewatering is one way to control water at a mine site. In the mining industry, dewatering is an important thing that needs to be done so that the mining process can run well.


Previously, controlling water at mining sites was basically divided into two types, namely:

  • Mine Drainage : Efforts to prevent water from entering or flowing into the work area. Mine drainage is generally carried out to treat groundwater or water originating from surface water sources. For example, various methods of diverting surface water flow ( river diversion , making ditches, and others).
  • Mine Dewatering : Is a way to remove water that has entered and is in the mine site. Mine dewatering is done by making a sump (delayed well), a trench system, and a pumping system.

Mine Pump for Dewatering

In the mining industry, mine pumps are indispensable and need to be known. This is because this tool is like a medium that guards the work location so that mining activities can run without obstacles.

Even in today’s era, every coal mining company is highly recommended to use mining pump services. This recommendation is intended so that the work can run effectively, efficiently, and with minimal risk.

Because, apart from dewatering, mine pumps can also be used to provide water to mining areas through river water that is used.

The mine pump itself has a working system with the principle of flowing water that is in a water reservoir or sump to the river so that the water does not interfere with the running of mining operations.

Types of Mining Pumps Dewatering

It should be understood, the water in the sump is water that comes from mining. Even so, this water is also a mixture of rainwater. For water from mining comes from each excavation which eventually releases groundwater.

The water is also collected in sump reservoirs and will later be channeled into the river.

In general, there are two types of mine pumps commonly found at mine sites. Here’s the review:

1. Non Submersible Mine Pumps

The type of non-submersible mine pump is a pump that is on a pontoon or land. This pump has a higher capacity because it can move water from a larger discharge.

Not only that, non-submersible mining pumps can also be driven using two types of power, namely electricity and diesel.

2. Submersible Mine Pump

Submersible mining pumps are the opposite of non-submersible pumps . Miners generally also need this type of pump to carry out dewatering . As the name suggests, this type of pump works by being immersed in water.

The power capacity available by these pumps is generally lower than that of non-submersible pumps . This pump works after excavation of the mine which produces water, then the flow is diverted.

Before draining water with this pump, it is necessary to ensure that the water must have a low PH, ranging from 3 to 5.

3. Electric and Hydraulic Submersible Pump

Submersible mining pump propulsion device , which is a tool with an electric type. For electric and hydraulic submersible pumps , the ends generally require different levels of immersion.

Meanwhile, power packs need a flat and wide space on the ground. Electric submersible pumps can handle large volumes or significant heads , but are limited to handling smaller solids at higher heads .

This type of pump must be installed semi-permanently, moved infrequently, and maintained by a qualified technician or electrician.

In most cases, electric submersible pumps (such as vertical turbines) run at very high speeds. Meanwhile, the required head can be achieved at a speed of approx. 3,600-rpm.

This creates potential wear from pumping slurry water at high speeds, reducing pump life. While the rubber coating on the wear parts may be a solution, it is not a long term solution compared to the hardened wear plates of these pumps.

4. Trash Pumps

Garbage pumps are usually portable and can handle solid water, making them ideal for dewatering applications . This type can also be run on diesel, gasoline, or electricity depending on your needs.

The garbage pump is designed with a deeper impeller vein and a larger discharge opening. This allows it to move liquids containing solids that would normally clog other standard pumps.

The garbage pump can even perform applications at higher speeds.

The main advantages of the sewage pump in dewatering applications are the adjustable speed and higher flow and discharge pressure.

This pump is also easy to use and maintain due to fewer components than other pumps.

Even so, the garbage pump also has its drawbacks, its fuel capacity is limited so it must be monitored and filled more often.

5. End-Suction Pump

This pump is the most common type of centrifugal pump and is widely available in a variety of sizes, …

No Picture

Renewable Energy has Several Impacts

The increasing demand for energy makes the use of renewable energy begin to be carried out. Renewable energy is the best option to meet the need for electrical energy considering that non-renewable energy such as fossil fuels and coal is predicted to run out and take thousands of years to be renewed.

Unfortunately, until now the use of renewable energy has not been maximized considering the various impacts caused by its use.

The following impacts need to be considered first so that the use of renewable energy can be profitable in the short and long term.

Renewable Energy

Renewable Energy  Social Impact

If considered in terms of its social impact, the use of renewable energy can provide social benefits such as an increase in a healthier environment, advances in technology and opportunities for work.

This can happen considering that some renewable energy resources such as water, wind and sunlight are considered environmentally friendly and can reduce pollution levels.

However, not all of them can maximize this potential, considering that renewable energy such as water, wind and sunlight are not obtained in equal portions in each region, so there is the potential for social inequality to occur.

Renewable Energy Economic Impact

Economically, the use of renewable resources can clearly have a big impact. This is because renewable energy development projects can increase employment opportunities, benefit material suppliers, and simultaneously revive the economy.

On the other hand, the use of renewable energy can also have a good impact in the long term because it is considered more cost efficient.

However, to realize the use of renewable energy requires a lot of investment and this often hinders the development of renewable energy.

Environmental Impact

One of the biggest impacts that will be felt in the use of renewable energy is the environmental impact. Some renewable energies such as sunlight, wind and water tend to be environmentally friendly and can reduce pollution in the form of carbon dioxide gas in the area around the plant.

However, to increase its capabilities, usually using batteries in solar PV storage. Waste batteries that are not used have the potential to become hazardous waste pollution. Therefore, it needs to be done together to recycle the battery.

Network Impact

In utilizing renewable energy, a different network is needed compared to the use of conventional energy. This is because renewable energies such as solar, hydro and wind are classified as unstable in terms of energy supply considering that their energy supply depends on climate and weather.

However, usually solar and wind power is off the grid, so for maximum utilization it is necessary to build a network that has the potential to increase costs.…

No Picture

Underground Oil Tank Removal for Environmental Protection


Underground oil tank removal could spell disaster for new homeowners. Buying a house with an underground oil tank is one of the most dangerous decisions a buyer can make. That’s because, if the tank were to leak or if oil pollution was discovered in the soil, comprehensive decommissioning and remediation may be prohibitively expensive.

Cleaning up a leak from an underground oil tank may cost thousands to hundreds of thousands of dollars, depending on the level of pollution — and the worst thing is that your homeowner’s insurance may not cover any of the costs.

Of course, not all oil-heated homes have underground tanks; some have above-ground tanks in the basement or on the porch.

Those who own older houses that have been converted from oil to another kind of heat are also at risk, as many homeowners abandon their subsurface oil tanks when the heating source is changed or they transition to above ground, leaving them without adequate drainage and disposal.

How to Determine if You Have an Underground Oil Tank in Your Home

If there is a tank underneath, it will usually be no more than 10 feet from the foundation of the house. Pipes jutting from the ground are the most evident evidence. A fill pipe is used to fill underground oil tanks with oil, while a vent pipe is used to exhaust the tank.

The fill and vent pipes have been removed in some cases, but the tank has remained. A test is carried out by a tank removal firm using a metal detector and ground-penetrating radar to determine the existence of an oil tank.

Copper pipes in the basement that have been sealed off are another sign of an underground oil tank. They might lead to an underground oil tank if they go outside the home and underground but aren’t plumbing lines.

Process Of Removing an Underground Oil Tank

The rules governing the removal of oil tanks vary widely from state to state. In Michigan, for instance, all underground oil tanks must be properly closed and removed within a year of their final usage. New York is likewise a supporter of the removal of underground storage tanks.

A professional tank removal service is frequently used to remove an oil tank since their skilled professionals have the appropriate expertise and equipment. Furthermore, removing an underground oil tank normally necessitates the acquisition of particular licenses.

Before an underground oil tank can be removed, it must be carefully cleaned and drained of any leftover oil. It will be pulled out of the ground and transported off the property on a trailer once it is ready to be removed. The tank is then appropriately disposed of and, if feasible, repurposed or recycled. The cost of removing a tank varies depending on its size and location, but it normally runs from $1,000 to $2,500.

If you have an underground oil tank and are aware of it, you should get it inspected regularly by an expert and insure it separately. Even taking these precautions will not protect you against a leak. So, what if your tank does start to leak?

Issues that Might Arise from a Leaking Underground Oil Tank:

High Investment

If you have an underground oil tank, you’re in significant danger of having an oil leak – and whether you have one now or later, the expense of cleaning up tainted soil and water sources can run into the thousands of dollars.

You may need to excavate a large portion of your land to remove and restore the soil, as well as clean up any contaminated water sources. You must also repair or replace your tank in addition to the cleaning costs.

Homeowner’s insurance never covers these expenditures; if you look closely, you’ll usually find a disclaimer for oil tanks in your policy. Some states provide funding to assist with the costs of cleaning up oil spills, but because the number of claims exceeds the amount of money available, your insurance may only cover a portion of your costs.

Health Hazards

Oil vapors in high concentrations, such as those produced by an oil spill, can be harmful to your health. Disorientation, nausea, dizziness, sleepiness, headaches, and other side effects are common in the short term. Long-term consequences on your health as a result of persistent exposure might be even more serious. If you can smell the oil, you should leave immediately to avoid any health risks.

Lawsuits that may be filed

You may face possible litigation from impacted neighbors in addition to the costs of cleaning up an oil spill and repairing or replacing your underlying oil tank. If your oil spill contaminates a neighboring well, for example, you may be sued to reimburse the costs.

Utility companies and government entities have been known to pursue lawsuits if …

No Picture

Solar America Initiative and the New Economy

Solar panels have been around for decades, and it’s easy to find years of studies showing their benefits. For the past several years, the Solar America Initiative has collected multiple studies showing that most homeowners will break even on solar panels. That is, the cost of installing a system equals the expected bills that these homeowners can anticipate over the lifetime of their system. For many homeowners, this has meant taking a “wait and see” approach to solar panel installation.

Over the past two years, however, our rapidly changing economy has made many of these studies obsolete. The scientists and economists at Solar America Initiative have determined that there are several new factors to consider when making the decision to purchase and install solar panels.

The Rising Cost of Electricity

Over the past several months, a lot has been written about the rising cost of energy. Natural gas, oil, and even coal have all undergone sharp price increases. Looking ahead, the prices for these commodities are only expected to further increase as instability in the Middle East and Russia (the chief areas of the world outside of the United States where these commodities are produced) continues to increase. Predictions range anywhere from an expected 10 to 50 percent increase in raw material prices.

To make matters worse, the employees that are needed in many power plants are in short supply, with a particular need for highly skilled employees. That has meant that many power companies have been forced to increase wages in order to retain their existing workforce and attract new hires.

All of this has resulted in high increases in the cost of electricity from local power plants. While the old formula assumed inflation rates in the price of electricity of around 3%, it may make more sense to now use a rate of 5 or even 10 percent per year. That makes getting solar panels now and avoiding these higher costs look a lot more attractive.

The Rise of Inflation

Of course, the rapid rise of inflation is also affecting the raw materials used to make solar panels. Fortunately, once panels are purchased, the cost is fixed. That is, purchasing a solar panel system today, even if it is purchased on credit, means that the price of that system will remain the same throughout the life of the system. If a consumer knows that a system will likely cost ten or fifteen percent more in the next year or two, it makes sense to purchase the system today. Even if the system has to be financed, a homeowner would still be saving money overall.

At Solar America Initiative, we want to show you how solar panels can help your family’s finances in this new economy. Give us a call today and let us show you how solar panels can save you money and provide your family with added security.

No Picture

Top 10 Best Selling Items & Categories on Amazon in 2022

Everyone wants their product to be a best-seller on Amazon. These items sell a lot more than most other products in their category, bringing in a lot of money for the vendors. If you’re fortunate, you might even come across a product that Amazon Choice, an algorithm that recommends things to customers using voice search, finally recommends.

People are joining up for Prime memberships in record numbers, increasing sales across the board. The finest products are now bringing in thousands of dollars each hour for sellers. Unfortunately, the majority of products will never achieve this level of success. However, if you conduct thorough product research and select the right things to sell, your chances of success will skyrocket.

To know more about best selling products on Amazon, you can understand from the below link:

A list of top categories of Amazon

  • Home & Kitchen
  • Sports & Outdoors
  • Toys & Games
  • Beauty & Personal Care
  • Health, Household & Baby Care
  • Kitchen & Dining
  • Office Products
  • Garden & Outdoor
  • Tools & Home Improvement
  • Pet Supplies

It is crucial to consider whether they’re overly competitive when looking at those categories. The last thing you want to do is enter an oversaturated market with a slim possibility of appearing on Amazon’s first page of search results. However, while these broad categories may be oversaturated, show you how to delve deeper into subcategories to identify better product prospects later.

Know about selling on Amazon: Best Practices

Know how to attract traffic and enhance conversions now that you know what to sell. Even if your store has the exact things that your target market is looking for, merely listing products does not guarantee that they will be purchased.

  1. Request Testimonials from Customers

Send a follow-up email a few days after customers get their orders, whether you fulfill orders on your own or through FBA, to inquire about their experience and buy. Customers are invited to leave a review based on their experiences. The customer journey includes reading reviews and the customer questions and answers area; the material is used as part of their study. The more reviews and responses to customer inquiries you have, the better it demonstrates that people are interested in your product in the marketplace.

  1. Get the Best Seller Badge.

The best-seller listings on Amazon are updated every hour. These frequent updates are an excellent method to have your products viewed by buyers who start their search on these pages to buy them. You must sell the most products in your category to get a top seller badge and feature on the list.

Begin by selling in a narrower category with fewer options. You have a better chance of standing out if you use the correct advertising and marketing. Shoppers discover more about your other products, even those without the bestseller label, as you create more traffic to your product pages and customers click on your branded landing page on Amazon.

Final thoughts

Commit to the continual audience and product research to be a profitable Amazon seller. This provides you with insight into your audience’s changing wants, allowing you to ensure that your products continue to fulfill their needs.

Using Google Trends to identify what types of things people are interested in and searching for is one approach to stay current. This method can even aid with seasonal planning, allowing you to sell the right products from the Amazon product categories above at the right time. For example, you can do research to determine when buyers are more likely to purchase specific electronic products. You can launch promotions ahead of time to catch customers’ attention and allow them time to conduct their product research before converting and purchasing.